10 Kilo Ohm Resistor Color Code

October 30, 2023 Post a Comment

10 kilo ohm resistor color code

10 Ohm Resistor Color Code: Brown, Black, Black, Golden. Resistance: 10 Ohm, Power Rating: 0.25 Watt, Approximate Maximum Current: 158mA .

What is the color code for a 10 KW resistor?

A 10k ohm resistor has 4 color band: brown, black, orange, and gold for 5% tolerance, respectively.

What is a 10K Ohm resistor?

Commonly used in breadboards and other prototyping applications, these 10K ohm resistors make excellent pull-ups, pull-downs and current limiters. These thick-lead versions of the resistors fit snugly into a breadboard with very little movement, so you should have few to no issues using them in your next project!

What color is a 330 ohm 10% resistor?

330 Ohm Resistor Color Code: Orange, Orange, Brown, Golden.

Is there a 10 ohm resistor?

RISARYA 10 OHM RESISTANCE,100PCS,MFR,1%,1/4 W,FIXED RESISTOR Fixed Resistor (10 ohm 1%)

How do I know if I have a 10 ohm resistor?

The color code of the 10 ohm resistor is:

4 band resistor. brown - black - black - [Tolerance]
5 band resistor. brown - black - black - gold - [Tolerance]

What is resistor color code chart?

Therefore, the first three bands indicate the significant digits, the fourth band is the multiplication factor, and the fifth band represents the tolerance. For the example shown here: brown (1), yellow (4), violet (7), black (x 100 = x1), green (0.5%) represents a 147 Ω resistor with a 0.5% tolerance.

How do you calculate resistor color code?

Calculating Resistor Colour Code Values For example, a resistor has the following coloured markings; Yellow Violet Red = 4 7 2 = 4 7 x 102 = 4700Ω or 4k7 Ohm. The fourth and fifth bands are used to determine the percentage tolerance of the resistor.

How do I find the color code of a resistor?

Hold the resistor with the gold or silver band to the right and read the color codes from the left to the right. Select the color codes from the bands on the resistor. Read the colors from left to right. The resistance value based on the color code provided is now displayed.

Can I use 10K resistor for LED?

Using 10K on an LED is simply wrong. It just didn't seem prudent to me to have only 0.0005A flowing in those parts. That is half a milliamp in some situations this is a massive amount of current, it is a perfectly respectable amount of current.

Why use 10K pull up resistor?

If the resistor is too small, you may waste current pushing the button. If too large, the pull up effect may be so weak as to not be detected by the pin electronics. A value of 10,000 ohms (10KΩ) or so is a good value and has become a standard for pull up resistors. That's why you'll see so many of them.

How much current can a 10K resistor handle?

For example, suppose you have a 10k resistor that you're using as a pull-up resistor for a pin on a 5 V microprocessor. The maximum power drawn by the chip through the resistor (by equation #2) will be 5 * 5 / 10000 = 0.0025 W, or 2.5 mW. That's fine even the tiniest surface mount resistors.

What colour is a 470 ohm resistor?

470 Ohm 2W High Quality Carbon Film Resistor (CFR) with ±5% Tolerance and Tin Plated Copper Leads. 470 Ohm Resistor Color Code: Yellow, Violet, Brown, Golden.

What color is a 1000 ohm resistor?

Band	Value
2nd Black	0
3rd Red	100
4th gold	5%
	1k±5% Ω

What color is a 390 ohm resistor?

390 Ohm Resistor Color Code: Orange, White, Black, Black, Brown.

What is a 10 ohm resistor used for?

A passive device that resists the flow of electricity. Description: This resistor will provide 10 Ohms of resistance wherever it is placed and will handle 1/4 watts. Use these low value resistors for voltage dividers and where you need to keep the current flow as high as possible.

What is the voltage across 10 ohm?

Voltage drop across 10 ohm -> Vr1 = 10 * i1 = 10 × 0.227 volts.

How much voltage does a 10K resistor drop?

Example: How much voltage is dropped across a 10K ohm resistor which has 5mA flowing through it? The voltage dropped across the resistor is 50 volts, because E = IR = 5mA * 10K = 50 volts. (Note that "K" means 1000's of ohms, and "mA" means 1 x 10-3 amps).

What does 10R resistor mean?

In the example shown here, the value isn't 100 ohms as you may have thought, but it is in fact 10 ohms. Low value resistors such as this are also sometimes marked as 10R. Another example, a resistor marked 472 has a value of 4700 ohms or 4K7.

How do I check my resistor?

Pick out a random resistor and set the multimeter to the 20kΩ setting. Then hold the probes against the resistor legs with the same amount of pressure you when pressing a key on a keyboard. The meter will read one of three things, 0.00, 1, or the actual resistor value.